No colour selected
Hammerite Direct To Rust Metal Paint Aerosol - Hammered Finish
Key Information
Finish
Smooth gloss incorporating a hammered pattern
Coverage
Aerosol - 400ml covers up to 0.5m²
Drying Time
Touch Dry: 1 -2 hours Recoat: 15 minutes
Coats
3
Product Features
3-in-1 system that is easy to use|All weather protection
Superior anti-corrosive power - it can be applied directly to rust
Ultra tough
Water repellent
Dualtech™ Technology
Product Description
A solvent-based enamel formulated to perform as a tough barrier against rust caused by humidity and moisture. It was specially formulated to perform as primer,\r\nundercoat and topcoat in one. Its Dualtech™ technology provides two-way protection by repelling water and also stopping rust, to keep ferrous and non-ferrous metals protected for longer. Available in a Hammered Finish or a Smooth Finish. Standard colours are available in Smooth and Hammered appearance and matched to in-house colour standards and are not matched to BS 4800 or RAL standards.
Application Description
Brush,conventional spray or airless spray,aerosol.
Health & Safety
For detailed safety information refer to Material Safety Data Sheet.
Tips & Advice
1. Preparing the Surfaces
Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush. Remove dirt, dust and grease with diluted detergent.Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow time to dry.Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for at least 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface. If there is a reaction remove all paint from the surface. On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint.
Copyright @ 2024 AkzoNobel Paints
